Shower Installation Demystified - A Comprehensive Guide For New Units

Shower Installation Demystified - A Comprehensive Guide For New Units

Blog Article

Book Appointment Now

Nearly everybody seems to have his or her own opinion about How to Install a Direct-to-Stud Shower Enclosure.

An effective shower installment calls for cautious planning and also a lot of job. Most of the times, you will need to do 3 kinds of tasks: framing walls, mounting the plumbing, and also ending up wall surfaces.

Prep work

First of all, you must pick the type of shower that you wish to mount. It is necessary to identify whether the selected shower is capable of coping with particular systems as well as can control a safe level of water via the central heating boiler. A lot of shower systems nowadays are designed to be adaptable to various water pressures (such as stored hot water and also chilly mains).
It is also vital to take into consideration the water pressure and also the preparation of the piping as well as drainage for the shower

Various Kinds Of Shower Units

Push-on Mixer: The hose pipe and spray parts of the push-on mixer shower device can be linked to the bath faucet as per your need, as well as the water temperature can be readjusted by means of the taps. Push-on mixers are cheap and also very easy to mount. Nevertheless, although the hose connection is simple, it is conveniently dislodged. In addition, it is bothersome to change the temperature.

Bath/Shower Mixer: The pipe and spray of this sort of shower are integrated with a bathroom mixer faucet, and the temperature level can be adjusted via the bath faucets. It is an extremely cheap choice and also no additional plumbing is entailed. Nevertheless, the bath/shower mixers also deal with bothersome temperature control choices.

Guidebook Mixer: The hose as well as spray of a hand-operated mixer shower unit are a part of the wall surface unit as well as the cold and hot water products are attached to a single valve The temperature level and also pressure of the water are managed via either one or a variety of knobs (in a lot more pricey showers). Although temperature control is much easier in hands-on mixer kinds, they are more expensive than the previously pointed out mixers. They additionally require extra plumbing of cold and hot water pipelines.

Thermostatic Mixer: The hose and spray of this shower type are a part of the wall surface device and the cold and hot water products are connected to a single shutoff here too. It is total with a built-in stabiliser to self-adjust the water temperature level and also to prevent it from ending up being also warm. One of the most significant advantages of a thermostatic mixer shower kind consists of convenient temperature control. Nevertheless, it is one of the most pricey of the different mixer choices.

Power Shower: A power shower is a solitary device having a powerful electric pump that is capable of changing both the water stress and also temperature level. This sort of shower can be fitted if there is water supply from a cold water tank and a hot water cylinder. A power shower makes the modification of both stress and also temperature level easy. On the other hand, it is unsuitable for water heated directly by the shower or where the water is supplied by a combination central heating boiler under keys stress.

Electric Shower: An electrical shower is plumbed right into a keys cold water supply as well as it heats up the water electrically. It is very important to note that for this shower kind to be mounted, the keys stress needs to be a minimum of 0.7 kg/sq cm (10lb/sq in). The unit allows the temperature level and also stress to be changed through a knob. Models with temperature level stabilisers are much better as they continue to be untouched by other taps elsewhere in operation within the family. A significant disadvantage of electric showers is that the control handle only allows for the option of high temperatures at much less stress, or reduced temperature levels at a higher pressure. This is troublesome in the winter season when the spray is frequently weak and the keys water is cooler. Nevertheless, this problem is taken on in some versions which are offered with a winter/summer setting.

Approach

Depending upon the kind of shower you wish to mount, the shower head need to either be fitted in order to prevent its contact with the water in the bathroom below or the base tray, or it must have a check shutoff.
Before beginning, it is a good idea to mark the positions of the shower head and also control, as well as to plan the pipe-work included. Additionally, the water drainage system to eliminate the waste water will certainly need to be planned. Both settings of the cable television course as well as the shower switch will certainly also require to be thought about if an instantaneous or electrical shower unit is being mounted.
Utilize the instruction overview provided with the shower device to fit the shower control.Before suitable the pipes that will provide the water to the shower system, it is essential to remove the water. In order to secure the pipes, they need to be provided a waterproof covering as well as likewise fitted with isolating shutoffs. The pipes can after that be buried right into the wall and also plastered over to neaten the general look.
Fit the base tray, shower head, as well as installations.
Link the major shower control to the pipes that will certainly be providing the water (This may call for a female screw string adapter).
Reconnect the water supply as well as examination the pipes for any type of leakages, as some may require tightening.
If you are setting up an electric shower, remember to turn off the electricity supply before making any kind of electrical connections. As soon as these connections have been made (there need to be guidance within the instruction manual), the power supply can be switched over back on.

Adjusting Water Pressure to Fit Your Shower

The cold water storage tank can be lifted to a higher elevation (sometimes as little as 150mm (6inches)) by installation a solid wooden support underneath it - perhaps composed of struts as well as blockboards. If you select this alternative, the main as well as circulation pipelines will certainly also have to be increased to fulfill the new height of the tank.
Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is chosen, it should be linked right into the power supply in order to run.

Piping and Drainage

It is best to utilize 15mm size supply pipelines, and also make the go to the shower as brief and also straight as feasible so regarding maintain optimal stress and also minimise heat loss. Additionally, by minimising using arm joints for pipe corners, you can decrease the resistance in the flow of the water system. You can accomplish this by flexing the pipelines rather.

The Majority Of Usual Blunders

Violating or ignoring local code restrictions.

Using pipes that are too small.

Attaching copper to galvanized without using a brass or dielectric fitting between the two.

Not using tape or pipe compound at threaded joints.

Not leveling your components when installing them.

Not installing an air void loading for components.

Reducing supply stub outs also brief to set up the shutoff valves onto after the completed wall is in place.

Not properly aligning tubing right into installations or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubing is at an angle will create a leakage.).

When transforming the water back on in your house, always run the outside hose shutoff or purge your bathrooms to bleed dirt and air from the lines. This particles can create issues in your sink faucets and other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Do you like more info about How to Install a One-Piece Shower Unit? Place feedback down below. We will be interested to find out your suggestions about this page. Hoping that you come back again soon. So long as you enjoyed reading our article plz remember to pass it around. Thanks for taking the time to read it.

Schedule Your Job Now

Report this page